Is the LED on your Netgear wireless router flashing red? If the question can be answered in the affirmative, you should think about carrying out a factory default reset by accessing the Netgear Nighthawk setup wizard. What happened?
Have you attempted to reset your device, but this did not fix the Netgear router red light issue? Gotcha! You may fix the problem you’re having in the shortest amount of time possible by paying attention to the troubleshooting hacks provided in this article.
Why Are You Facing Netgear Router Red Light Issue?
- The power supply coming from the wall socket is insufficient.
- You have not carried out Netgear router setup in an appropriate manner.
- Your WiFi device is suffering from radio interference.
- Your existing modem and the Netgear router have a weak connection.
- You may also be forced to face the red light issue due to an outdated firmware.
- A number of WiFi-enabled devices are accessing the network of your router.
Now that you have a complete understanding of the factors that contributed to the Netgear router red light issue, let’s go a bit further to find out how to fix it.
[Fixed] Netgear Router Red Light Issue
Basic Troubleshooting Hacks
- Reboot the Netgear Router
To begin, please restart the WiFi router. You just need to follow the steps that are outlined in the following section in order to give your device a fresh start:
- Put your Netgear router into standby mode.
- Pull the plug out of the wall socket where the device is plugged in.
- Hold your horses.
- Make sure that your Netgear router is plugged into the appropriate power supply.
- Activate the device you’re using.
Now try to access the Netgear router login page and check to see whether you were successful in resolving the Netgear router red light issue. If not, follow the next hack.
- Avoid WiFi Interference
If you are still seeing the LED on your Netgear router flashing red, then you may think about moving your device to a different position. Also, when you do this, be sure to keep it away from the following:
- Cellular phones
- Washing machines
- Baby monitoring systems
- Fish tanks
- Aluminium studs
The reason for this is because such things have the potential to disrupt the WiFi signals sent by your Netgear router, which in turn will force its performance to suffer.
Advanced Troubleshooting Hacks
- Perform Netgear Firmware Update
If it has been quite some time since you last updated the firmware of your Netgear router, then you should do it right now. The following is a list of the steps that you need to follow in order to successfully upgrade the firmware on your Netgear router:
- Turn on your computer.
- Open your internet browser.
- Simply put the web address into the URL bar at the top of your internet browser.
- Make sure you press the Enter key.
- After you have entered the default credentials, click the Log In button.
- On the Netgear Genie dashboard, choose Settings > Maintenance from the menu.
- To update the firmware, click Firmware Update.
You can also update the firmware of your device using the Netgear Nighthawk app.
- Disconnect Extra Devices
As was indicated before, if there are an excessive number of devices accessing the network provided by your router, you may also have the Netgear router red light issue.
It is advised that you unplug any additional devices that are accessing the network of your router. This will allow you to resolve the problem.
The Netgear router red light issue is one of the most prevalent problems that consumers have. If you are also having the same problem, then putting the aforementioned hacks into practice will be the greatest course of action you could possibly take to resolve the issue.