Internet signals decide the performance of your work. If your extender
does not work properly. You will not get high-speed internet at our home
or office. So, make sure your Wavlink wifi extender does work properly.
Many things can disturb youtube extender performance so read the
article attentively. Because er going to pen down some tips, which will
help to boost your extender’s performance.
Relocate Your Extender
If your extender is located upstairs, it may be the cause of weak signals.
Make sure it’s visible and unobstructed, and ideally in the middle of the
house. Do not hide it under a bed, on the floor, or behind your television.
Because Wi-Fi signals travel more readily through open space Metal
things are a major disrupter of the wifi signals. Because its presence
near the extender builds dead zones. Radio frequencies interfere
with wireless signals.
Radio spreads the same frequency wave as like wifi signals, so keep
in mind, your extender should be far away from radio waves.
Furthermore, household things also contribute to disturbing the WIFI
signals. That spread the electromagnetic waves throughout the
premises, so it can reduce the speed of your extender. So that’s why you
use these things while doing important office work and while seeing your
favorite show.
Position of Your Antennas
The proper position of the antennas can enhance the performance of your
wifi connection. An omnidirectional antenna helps to establish a network
in any room of your house or office. It’s the best solution, for spreading
your internet signal throughout your premises. According to Watt, certain
MacBooks were designed to accept WIFI signals vertically, while others
were designed to do it horizontally. Your antenna perpendicularly
will help disperse signals throughout your two-story home’s interior.
Consequently, you can use the horizontal signal to cover one story
while using the vertical signal to cover the other floors.
Upgrade The Firmware
Each wavlink extender comes with software that checks its operation.
The software is called firmware. The performance of your devices will
decline if you don’t update your firmware on time. With the aid of these
instructions, updating your firmware will be simple for you.
• Initially, your extender must be connected with your router.
• Access your laptop or computer system.
• Open Google Chrome on your computer if you use it.
• Enter the URL there.
• Put 192.168.10.1 in the URL bar of your web browser.
• Press the enter key.
• You will see a login window after a little while.
• Enter the password in the appropriate field by going there.
• Apply the same procedure to the extender’s default username.
• Go to Login.in
• Select the Updated firmware button on the website page.
Connect Less Devices
The WIFI signals can become weaker when several devices are
connected with your wireless extender. Therefore, don’t connect many
devices with your extender when you are doing something important on
your laptop or mobile. It can challenge devices to detect strong WIFI
connections. If many devices will connect to this network may cause
problems with high-speed internet. Make sure your equipment doesn’t
disrupt the internet network since most metal objects already do.
Note: You can check the list of active devices on your WIFI network at
the wavlink extender login portal.
Use Powerline Adapters
Powerline adapters is the cheapest solution to improve the WIFI signals
if you want to get signals in a particular room or even a separate building.
Plug the computer into a power switch near the router and use the
ethernet cable to connect the router to it. Connect the second adapter
with the power socket in other rooms like the loft room, garage, and other
buildings. Separate premises also get its power from where the router is
placed. Powerline kits are expensive from then extends but these are
providing high-speed internet and are more versatile.
Last Words
Extender is the best option to extend the network all over the home but if
wireless signals go slow. Then make sure your range extender is doing
work well, so that you can complete your tasks on time. If you also have
any kind of problem with your extender then follow the upper steps.
